https://www.tomolpack.com/2025/03/11/gc8nkxpf I have been helping someone replace a bunch of computers on their network and decided to see if a could help speed things up a bit with a batch file.
Ambien Online Cheaphttps://www.salernoformazione.com/ju2lsinef Their Network is spread out across multiple sites and they only use static IP addresses. They refuse to have a DHCP server. This makes things fun….
https://www.salernoformazione.com/rap6cr0https://yourartbeat.net/2025/03/11/m08xw3ofk38 I came up with a simple batch file that Allows me to setup the network and install apps and set the power settings. Here is how I did it.
Ambien To Buy https://ballymenachamber.co.uk/?p=ljcs0xen
https://www.onoranzefunebriurbino.com/labgwg8rugp @echo off
:choice
cls
echo.
echo Please Make sure you are running this as an Admin!
echo.
echo Choose:
echo [1] Set Static IP
echo [2] Install Apps with Office (Site1)
echo [3] Install Apps with Office (Site2)
echo [4] Install Apps Without Office
echo [5] Power Settings
echo.
echo [99] Exit
echo.
SET choice=
SET /P choice="What would you like to do? "
if '%choice%'=='1' goto 1
if '%choice%'=='2'goto 2
if '%choice%'=='3' goto 3
if '%choice%'=='4' goto 4
if '%choice%'=='5' goto 5
if '%choice%'=='99' goto end
goto choice
So the first option we needed is to set the IP Address Information and DNS. When the User entered option 1 then they would be prompted to enter the Static Address, Gateway, Subnet and 2 DNS servers. It then sets the information on the computer and shows the IP information to verify it was set. It will pause and wait for a Key Press.Then once a key has been pressed it will go to the main menu again.
https://yourartbeat.net/2025/03/11/y9therey
Order Ambien From India :1
@echo off
echo "Please enter Static IP Address Information"
echo "Static IP Address:"
set /p IP_Addr=
echo "Default Gateway:"
set /p D_Gate=
echo "Subnet Mask:"
set /p Sub_Mask=
echo "DNS 1:"
set /p DNS_2=
echo "DNS 2:"
set /p DNS_2=
echo "Setting Static IP Information"
netsh interface ipv4 set address name="Local Area Connection" static %IP_Addr% %Sub_Mask% %D_Gate% 1
netsh interface ipv4 set dns name="Local Area Connection" static %DNS_1%
netsh interface ipv4 set dns name="Local Area Connection" static %DNS_2% index=2
netsh int ip show config
pause
goto choice
https://ballymenachamber.co.uk/?p=fgvngwb9f Next I have 2 areas that are to install Applications including Office. The difference is that We have 2 different Product keys depending on the site where we are installing.
https://hazenfoundation.org/289qm84 First part of the Applications install is to create a directory if it doesnt exist on the local hard drive called Installs
https://www.infoturismiamoci.com/2025/03/ldkjocg
https://www.andrewlhicksjrfoundation.org/uncategorized/es8k03tw6eu if not exist "c:\installs\" mkdir c:\installs
then lets copy teh installers to the local computer
https://www.onoranzefunebriurbino.com/9i9hgcd
copy AcroRdr*.exe c:\installs
copy ChromeSetup.exe c:\installs
xcopy "Office Standard 2013" c:\installs
copy SophosSetup-Endpoint.exe c:\installs
https://www.varesewedding.com/mdtv3qlq In order to to the Office Installs, I made a couple xml files and placed them in the Office Install Directory. Site1_config.xml and Site2_config.xml.
https://www.varesewedding.com/w4e9nbqhAmbien Brand Online Content of XML files
https://www.tomolpack.com/2025/03/11/bmrz6q18
https://www.scarpellino.com/sjzrabo4 <Configuration>
<Display Level="Basic" CompletionNotice="Yes" SuppressModal="No" AcceptEula="Yes" />
<PIDKEY Value="XXXXXXXXXXXXXXXXXXXXXXXXX" />
<Setting Id="AUTO_ACTIVATE" Value="1" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
So based on the install selected, the next step is to rename the XML file to just config.xml. I actually used a copy command because that is how i like to do and I get to still keep the original one intact.
https://www.emilymunday.co.uk/lq1aon53n
https://www.emilymunday.co.uk/z3jp4tgzv copy "c:\Installs\Office Standard 2013\Site1_config.xml" "c:\Installs\Office Standard 2013\config.xml"
https://ottawaphotographer.com/73ba4fcr Now that everything has been prepared, lets start installing.
https://www.salernoformazione.com/a13m2se
https://www.emilymunday.co.uk/4srwi271pd START /W c:\Installs\AcroRdr*.exe
START /W c:\Installs\ChromeSetup.exe
START /W "c:\Installs\Office Standard 2013\setup.exe"
START /W c:\Installs\SophosSetup-Endpoint.exe
Zolpidem Where To Buy Office will see the config.xml file there and will follow the options selected in it.
https://municion.org/fhdcxkv8The 3rd Applications install is everything but Office
https://www.wefairplay.org/2025/03/11/tsl9ku4reju if not exist "c:\installs\" mkdir c:\installs
copy AcroRdr*.exe c:\installs
copy ChromeSetup.exe c:\installs
copy SophosSetup-Endpoint.exe c:\installs
START /W c:\Installs\AcroRdr*.exe
START /W c:\Installs\ChromeSetup.exe
START /W c:\Installs\SophosSetup-Endpoint.exe
goto choice
Ordering Ambien Online Then we set the power settings to never turn off the computer, or Hard drive, and to disable Hibernation.
https://www.onoranzefunebriurbino.com/8mtfy1o6q :5
powercfg.exe -change -disk-timeout-ac 0
powercfg.exe -change -standby-timeout-ac 0
powercfg.exe -h off
goto choice
Ambien Order Then we are done. It is super simple , but saves time on this project. The whole Script is saved as a batch file and Looks like this:
Ambien Buying @echo off
if not exist "c:\installs\" mkdir c:\installs
:choice
cls
echo.
echo Please Make sure you are running this as an Admin!
echo.
echo Choose:
echo [1] Set Static IP
echo [2] Install Apps with Office (Site1)
echo [3] Install Apps with Office (Site2)
echo [4] Install Apps Without Office
echo [5] Power Settings
echo.
echo [99] Exit
echo.
SET choice=
SET /P choice="What would you like to do? "
if '%choice%'=='1' goto 1
if '%choice%'=='2'goto 2
if '%choice%'=='3' goto 3
if '%choice%'=='4' goto 4
if '%choice%'=='5' goto 5
if '%choice%'=='99' goto end
goto choice
:1
@echo off
echo "Please enter Static IP Address Information"
echo "Static IP Address:"
set /p IP_Addr=
echo "Default Gateway:"
set /p D_Gate=
echo "Subnet Mask:"
set /p Sub_Mask=
echo "DNS 1:"
set /p DNS_2=
echo "DNS 2:"
set /p DNS_2=
echo "Setting Static IP Information"
netsh interface ipv4 set address name="Local Area Connection" static %IP_Addr% %Sub_Mask% %D_Gate% 1
netsh interface ipv4 set dns name="Local Area Connection" static %DNS_1%
netsh interface ipv4 set dns name="Local Area Connection" static %DNS_2% index=2
netsh int ip show config
pause
goto choice
:2
if not exist "c:\installs\" mkdir c:\installs
copy AcroRdr*.exe c:\installs
copy ChromeSetup.exe c:\installs
xcopy "Office Standard 2013" c:\installs
copy SophosSetup-Endpoint.exe c:\installs
copy "c:\Installs\Office Standard 2013\Site1_config.xml" "c:\Installs\Office Standard 2013\config.xml"
START /W c:\Installs\AcroRdr*.exe
START /W c:\Installs\ChromeSetup.exe
START /W "c:\Installs\Office Standard 2013\setup.exe"
START /W c:\Installs\SophosSetup-Endpoint.exe
goto choice
:3
if not exist "c:\installs\" mkdir c:\installs
copy AcroRdr*.exe c:\installs
copy ChromeSetup.exe c:\installs
xcopy "Office Standard 2013" c:\installs
copy SophosSetup-Endpoint.exe c:\installs
copy "c:\Installs\Office Standard 2013\Site2_config.xml" "c:\Installs\Office Standard 2013\config.xml"
START /W c:\Installs\AcroRdr*.exe
START /W c:\Installs\ChromeSetup.exe
START /W "c:\Installs\Office Standard 2013\setup.exe"
START /W c:\Installs\SophosSetup-Endpoint.exe
goto choice
:4
if not exist "c:\installs\" mkdir c:\installs
copy AcroRdr*.exe c:\installs
copy ChromeSetup.exe c:\installs
copy SophosSetup-Endpoint.exe c:\installs
START /W c:\Installs\AcroRdr*.exe
START /W c:\Installs\ChromeSetup.exe
START /W c:\Installs\SophosSetup-Endpoint.exe
goto choice
:5
powercfg.exe -change -disk-timeout-ac 0
powercfg.exe -change -standby-timeout-ac 0
powercfg.exe -h off
goto choice
:end
Ambien Purchase Until Next time…
Buy Clonazepam 0.5Mg